This way I could see my measurement window from the stage on 10’x14′ screen! Live IR would of saved me a lot of time. On a recent show, I used the venue projectors to project my measurement window onto all the screens in the room. With LIVE IR, you don’t have to run back and forth between FOH and the stage to FIND DELAY. Now you can send your REFERENCE SIGNAL to each stage monitor. You feed pink noise down a return line to the monitor console. Let’s say you want to ring out 12 wedges on stage and your measurement rig is at FOH. I’ll give you an example of where this could be really helpful. With LIVE IR, it constantly updates the impulse response. What is so cool about the LIVE IR window? Without the LIVE IR window, every time you move the mic or adjust a delay time, you might have to FIND the delay offset time again. I don’t think the importance of this can be overstated. You can see everything you’re interested in knowing on the same screen at the same time and watch as you make adjustments system wide (if you’ve got enough measurements going). Pre-EQ Source: SMAART Screen Captures Courtesy Rational Acoustics LLC. These are just junk measurements but the concept is sound. If our phase measurement shows that we are in phase (or very near to it) across. Here is a screen shot of (3) overlapping measurements in Smaart 7. MEASUREMENT SIGNAL – measurement mic 6 / LOBBY MEASUREMENT SIGNAL – measurement mic 5 / DELAY MEASUREMENT SIGNAL – measurement mic 4 / OVER BALC MEASUREMENT SIGNAL – measurement mic 3 / UNDER BALC MEASUREMENT SIGNAL – measurement mic 2 / FRONT FILL MEASUREMENT SIGNAL – measurement mic 1 / FOH MAIN Or for a large setup using multiple mics, maybe something like this: REFERENCE SIGNAL – audio interface output In the case of being able to show multiple TF traces in the same window, this allows for realtime view of a setup like the following: Multiple transfer functions (as many as your hardware can handle) There are (2) things that Smaart 7 can do that in my opinion are worth the price of admission. I watched all the tutorial videos as well as read the available literature to get there. Here is a typical example set of settings:īelow is an example screen showing the Smaart® module in action.I finally got around to working with Smaart 7 long enough to get comfortable with the interface. Click on the spanner/wrench icon near the bottom of the screen to set the parameters.
GET SMAART 7 TO SHOW DB UPDATE
Tap on Acoustics, then on Smaart® Tools I. WU-BUG 7.2 ( new Software ) is tools for hijack and exploit westernunion database with bugs, this have some features like, create new transfer with new mtcn, update receivers and senders name, search list mtcn, can work with stealth mode, no log, support with all country to create transfer and modify transfer, etc. You will be asked for your App Store credentials so you can make the purchase.
From the home screen, simply tap on Acoustics then on Smaart® Tools I. If you haven't already, you will need to purchase the Smaart® plugin from within AudioTools. This photo shows an iPad mini connected to the UMIK-1 via the Lightning adapter:Ĭalibration is the same as described in the app note Using the UMIK-101 with AudioTools on the Apple iPad. To connect the UMIK-1 to your Apple iPad, you will need either the Lightning to USB adapter (for newer iPads with an 8-pin Lightning connector) or the Camera Connection Kit (for older iPads with a 30-pin connector). Mount the UMIK-1 into the small stand supplied with it, or if you like, you can use any other microphone stand.
GET SMAART 7 TO SHOW DB SERIAL NUMBER
Each microphone has a unique calibration file, which is why the serial number must be entered.
The calibration file ensures that your microphone is as accurate as possible. Use "Save As" in your browser to save the numbers as a file e.g. It is in the form xxx-yyyy and labeled on the microphone. Go to the UMIK-1 page and enter your microphone's serial number.
GET SMAART 7 TO SHOW DB HOW TO
This app note shows you how to set up the miniDSP UMIK-1 to use with the AudioTools Smaart® plugin but other functions of the Apple iPad hardware or the AudioTools app are beyond the scope of miniDSP support. Please note: miniDSP cannot provide support for third-party applications or hardware. In this application note we will show you how to set up your UMIK-1 for use with the Smaart® Tools from StudioSix Digital, running on an Apple iPad. The miniDSP UMIK-1 is the perfect companion to audio analysis programs running on your tablet or even your smartphone.